Questionnaire For Enquiry

FOR GENERAL CLEANING / SURFACE PREPARATION :
» Applicaton
» Duty : Working hours with start time/stop time and frequency per shift
» Pressure requirement : in Bar/Kg/Cm2/PSI,
» Flow requirement : in LPM/GPM,if possible.
» Surface area to be cleaned; in sq.ft/m2/inch2
» Given time to clean surface area; in sq.ft/ Min / or M2/Hr

FOR TUBE/PIPE CLEANING :
» Application: Boiler tube , Heat Exchanger, if any.
» Tube length : in meter/feet
» Tube inner dia : in mm/inch)
» Approx. Pressure requirement : in Bar/ Kg/cm2/ PSI
» Approx Flow requirement: in LPM/GPM
» Water hardness/if available
» Existing pump detail , if any.
» Brief about existing cleaning method & details of tools used.

FOR VESSEL/REACTOR CLEANING :
» Almost all detail of General Cleaning
» Dimension of Vessel IReactor

FOR MOTORISED HYDRO TEST APPLICATION :
» Flow rate of the pump : LPM/GPM.
  (If flow rate is not available then largest and smallest size/volume of equipment).
» Test Pressure of equipment which you want to obtain
» No of test to be carried out per day/per week
» Maximum pressure required which you want as factor of safety or future requirement.
» Would you like to stop the pump immediately after obtaining the pressure?
   If no, reason.